Integra DTR-40.4, Инструкция по эксплуатации

Страница: 62 / 104

Advanced Operations
En-62
Tip
• To name a radio preset, use Tuner to select AM or FM , and then
select the preset (
➔
page 31 ).
• To restore a name to its default, erase all characters with
CLR
,
select “ OK ” and then press Enter .
Note
• This setting cannot be used for the NET and USB input selectors.
Picture Adjust
Using Picture Adjust, you can adjust the picture quality
and reduce any noise appearing on the screen.
To view the TV picture while setting, press
Enter . To
return to the previous screen, press Return .
■
Wide Mode
*1*2
This setting determines the aspect ratio.
`
4:3 :
`
Full :
`
Zoom :
`
Wide Zoom :
`
Auto :
According to the input signals and monitor output
setting, the AV receiver automatically selects the
“
4:3 ”, “ Full ”, “ Zoom ” or “ Wide Zoom ” mode. See
“Monitor Out” for details on the monitor output
setting (
➔
page 52 ).
■
Picture Mode
*1*3
`
Custom :
All settings can be performed manually.
`
Cinema :
Select when the picture source is a movie or alike.
`
Game :
Select when the video source is a game console.
`
Through :
Does not adjust picture quality (changes resolution).
`
Direct :
Does not adjust picture quality (does not change
resolution). The video coming from an analog input
and output by the HDMI output is processed in the
same way as “
Through ”.
With “ Picture Mode ”, you can change the following
settings to be suitable for the movie or game screen by one
operation; “
Game Mode ”, “ Film Mode ”, “ Edge
Enhancement ”, “ Noise Reduction ”, “ Brightness ”,
“ Contrast ”, “ Hue ”, “ Saturation ” or “ Color
Temperature ”.
■
Game Mode
*4*5*6
`
Off
`
On
If video signal delay occurs during playback on a video
component (i.e., game console), select the corresponding
input source and set the “
Game Mode ” setting to “ On ”.
The delay will decrease but in return the picture quality will
become poor.
■
Film Mode
*4*6
`
Video :
“ Film Mode ” detection is not applied and the input
signal is handled as a video source.
`
Auto :
Detects whether the input signal is a video or a movie.
If it is a movie, the appropriate conversion is applied.
The AV receiver will adjust to the picture source,
automatically converting it to the appropriate progressive
signal and reproducing the natural quality of the original
picture.
■
Edge Enhancement
*4*6*7
`
Off
`
Low
`
Mid
`
High
With this setting, you can make the picture appear sharper.
Space :
Enters a space character.
Shift
*1
:
Toggles between lower and upper case characters.
(Left)/ (Right):
Moves the cursor left or right in the Name input
area.
Back Space *2 :
Moves the cursor backward and deletes one
character.
OK :
Confirms your entry.
Tip
*1 This can also be performed by using +10 on the remote
controller.
*2 Press CLR on the remote controller to delete all the
characters you have input.