INSYS WLAN bridge, Руководство по эксплуатации

Страница: 20 / 50

14 Implementation and Configuration INSYS WLAN bridge
If, however, the reset key is briefly pressed five times in succession, a complete device
reset will take place and the INSYS WLAN bridge is reset to default factory settings.
This will enable the device to be reset to default factory settings without having to
establish a connection to the device. This function is very useful when the INSYS WLAN
bridge can not be returned to an operational state, due to an accidental false entry
during configuration or when a password is lost.
5.4 Configuration Through Browser
5.4.1 Operation
The configuration pages allow simple and convenient configuration of the INSYS WLAN
bridge using a web browser (e.g. Internet Explorer, Netscape, Opera), regardless of the
used operating system. No drivers, etc. are required for the configuration.
The web interface is protected by a password. During the factory configuration, the fields
user name and password are empty, i.e. the pages can be accessed without entering a
password.
Note: A lost password can only be reset by completely resetting the factory
configuration. See RESET key to reset the INSYS WLAN to the default factory
settings (Chap. 5.3).
The settings in the individual configuration windows will only be saved when the button
“Apply” is clicked. To ensure that the settings are applied, a reboot of the INSYS WLAN
bridge must be performed. This is also possible from the configuration pages.
After the settings have been transmitted to the INSYS WLAN bridge , the configuration
pages must be reloaded (menu “Update” of the web browser).
The configuration pages are available in two languages. Use the symbol for the
English or German flag in the top right corner to switch between the two
languages.
5.4.2 Configuration
To be able to configure the INSYS WLAN bridge , it must have a network connection to a
computer with a web browser, either via the AccessPoint or the LAN connection
(Ethernet). The standard settings for the network parameters after delivery or resetting
to the factory settings are as follows:
IP = 192.168.100.203
Network mask = 255.255.255.0
Gateway = 192.168.100.1
For the initial installation a PC is required which can access this network segment, i.e.
which has an IP address from this network segment.
The easiest way is to set the PC to an address from this network segment (e.g.
192.168.100.100). Depending on the system, administrator rights may be required. The
connection between an INSYS WLAN bridge and the configuration PC takes place with a
crossed network cable. After the IP settings have been configured to the desired values,
version 1.01 / 10.04