Inoksan BYM052B, Руководство пользователя

Страница: 11 / 32

11

light While draining is in progress, the
DRAIN button is on, the light goes out
when the process is finished.
making sure that the water is completely
drained.
WARNING!!!
NEVER PUT YOUR BARE HANDS IN THE WASH
WATER. IF NECESSARY, USE PROTECTIVE
GLOVES. DO NOT RUB DETERGENT WATER ON
YOUR EYES.
9. TURNING OFF
1.
Press the “2 ON / OFF” button of the
machine.
2. Bring the switch that supplies the device to
"0" position.
3. Take the washed product out by lifting the
upper cover and close the cover.
4. Close the water inlet valve.
10.SECURITY MEASURES
1.
If the cover is opened while the device is
operating or if the cover is not completely
closed after it is started, the device will stop
operating. Device will start operating once the
cover is shut.
WARNING: If there are any damages on the
energy input cable or any water leakage on the
release pump, the device needs to be shut down
and an authorized service must be notified.
10.DAILY MAINTENANCE
1.
The wash water must be renewed at least two
times a day or when the water loses its ability
to clean due to dirty particles. Washing
performed with dirty wash water causes bad
washing results, along with detergent, polisher
and power wastage.
2. Before starting maintenance activities, turn off
the power switch that the device is connected
to.
3. Be careful so that the dirty water outlet is not
blocked.
4. Check whether the washing and rinsing arms
can turn easily. Check the water sprays and if
they are blocked, clean the holes with a thin
stick.
5. Leave the cover open after cleaning the
device.
WARNING; In order not to damage the
electrical equipment, clean the device
with a direct or high pressured water.
10.PERIODIC MAINTENANCE(

once every
2-3 days)
1. Never do maintenance while the device is
powered.
2. As shown in Figure 1, materials that can cause
blocking must be cleaned by taking out the
nozzles of the water sprays.
3. Clean the outer surfaces of the device with a
wet and soapy cloth. While cleaning the
surface of the device, do not use materials that
can leave marks on the surface such as
detergents, wire brushes etc. which have
abrasive content.
4. Clean the device warmers with an anti-lime
once a week.
5. Take out and clean the pump front filter in
certain periods.
6. If the device will not be used for a long time,
the surfaces need to be covered with Vaseline
in thin layers.
7. Contact the authorized service in case a
dangerous situation is noticed in the device.
Do not let unqualified people to interfere the
device.
8. After a certain operating duration, depending
on the hardness of water, the calcium and
magnesium in the water can cause the forming
of boiler scale on the interior surfaces of the
wash tank, boilers and interior sections of the
water pumps which can affect the devices
performance. For this reason, a boiler scale
cleaning process must be performed by a
qualified technician over time.
9. Maintenance of the boilers, emptying the
water inside the boiler and pump and cleaning
them must be performed by qualified people
periodically.
10. If there is a danger of freezing during the
times when the machine hasn't worked for a
long time, the wash pump and boiler must be
emptied.
11. Contact the authorized service in case a
dangerous situation is noticed in the machine.
Do not permit unqualified people to interfere
the device.
Child safety
This device is dangerous and forbidden