INNO-A10 User’s Guide
INNOSTREAM Confidential
PAGE : 31 of 102
[NAVI-RIGHT]
1.move the cursor to right direction by a character on the editing
area.
2.page down the Chinese Set if a stroke key was pressed before.
[NAVI-UP]
1.move the cursor to previous line if you are not in the stroke
entry.
2.page up the Chinese Set if a stroke key is pressed before.
[NAVI-DOWN]
1.move the cursor to next line if you are not in the stroke entry.
2.page down the Chinese Set if a stroke key was pressed before.
[NAVI-CENTRE]
launch the character input mode selection menu.
[END]
clear all the string entered on the editing area, and then turn
back to previous menu or screen.
[1] - [5]
Select a character among Chinese characters in the candidate area
[6]
Nothing
[7]
marked on [7] keypad is entered into the stroke area.
[8]
marked on [8] keypad is entered into the stroke area.
[9]
marked on [9] keypad is entered into the stroke area.
[*]
Short :
marked on [*] keypad is entered into the stroke area.
Long : switch to the Numeric input mode.
[0]
Short :
marked on [0] keypad is entered into the stroke area.
Long : Space
[#]
Short :
marked on [#] keypad is entered into the stroke area.
Long : switch to the Symbols input mode.
7.4 T9 Pin Yin input mode
T9 Pin Yin input mode provides input of
characters by entering the phonetic
spelling of the character. In this implementation, T9 software disambiguates the phonetic
spelling as it is entered and generates a candidate character list from which you may make
selections.
[Example Screen]
If you grant identity numbers to Chinese Sets in the candidate area according to the
