INNO-A10 User’s Guide
INNOSTREAM Confidential
PAGE : 20 of 102
The boxed digits in middle place of the title area of the screen indicate the number of the
focused call in the multiple calls state. You can focus to next or previous call by pressing
[NAVI-RIGHT] or [NAVI-LEFT].
In the main area of the screen, you can see the number or name (if stored in the phonebook)
and the call state of the focused call. Depending on your subscription, you may see the
remaining cost in the bottom area of the screen.
The time counter in the bottom area of the screen starts when the call starts and indicates
how long you have been on the call.
! Note: All of the call control options are not always displayed through all calls,
necessary options only will be displayed according to the call state.
5.1 Putting a call on hold/unhold
You can put the current call on hold when the call is active state if this service is
supported on the network.
1.
Press [Hold soft key], or select the Hold option in the Option menu if muted.
2.
To make the held call reactivate, press [Unhold soft key], or select the Unhold option
in the Option menu if muted.
5.2 Making a second call
You can make a second call whilst you are in a call.
1.
Enter the second phone number or fetch it up via Phonebook option.
2.
Press [SEND]. The first call is automatically put on hold if the second call is made.
< Connecting the first participant with another participant>
If you press [Transfer soft key] whilst the second call is being made, the function allows
you to make two participants connect, and then allows you to leave the conversation by
itself. Thereafter, two participants are connected to each other.
5.3 Swapping between active calls and held calls
You can swap calls whilst there are active calls and held calls on conversation.
Press [Swap soft key], or select the Swap option in the Option menu if muted.
The current active calls are placed on hold and the held calls are reactivated.
5.4 Answering a second incoming call
You will be notified of an incoming call whilst you are in a call. Call waiting tone sounds
in the earpiece, and the display will show that a second call is waiting. This feature,
known as Call Waiting, is only available if the network supports it and if you have set the
Call Waiting menu to Activate.
For details of how to activate and deactivate it, please see Call Waiting menu in Section 9.
