Inmes IM-300PL AL, Руководство оператора

Страница: 9 / 66

1 . 6 – To reduce risk of injury

Keep hands out of the saw blade path;

Hold the profile firmly to the fence;

Be careful when cutting small pieces, the profile or small scrap may move and break the blade or even dam-
age other parts, fig 03 and 04;
Fig. 03 Fig. 04

When cutting long profiles, it’s necessary to use extension table (see page 48);

Let the blade get full speed before cutting;

Do not use saw blades which are not in a good shape, for instance: broken teeth, because they are out of
balance and will not provide good cuts, as well as creating hazard to the operator;

Before starting the machine make sure that no objects have been left on the base;

Damaged and adapted parts must not be used for the IM-300PL;

Ao detectar qualquer anomalia na máquina desligue-a, desconecte-a da rede elétrica e providencie a manu-
tenção adequada;

If any part is missing, bent or broken in any way, or electrical part does not work properly, turn the saw
off, unplug the saw from the power source and provide proper maintenance;

Never use your machine if you observe something which can cause an accident or damage the machine;

Only use sharp blade;

Keep the saw blade clean;

Keep work area around clean, sawdust can make the floor slippery;

Never use the machine near inflammable liquids, dust, steam or gases;

Never cut more than one work piece at a time;

Any time the saw blade is removed for replacement or maintenance make sure that the machine is un-
plugged from the power source;

After replacing make sure the blade is properly tight;

Keep visitors and children away when using the machine;

The IM-300PL is designed for professional use. The operator has to be qualified to read and understand
the instructions manual;

Properly adjust the protection entrance when you cut different mouldings (see page 16 item 6.2);

After replacing the blade, make sure it be rotating on the right direction as shown in Fig. 05 and 06.
W A R N IN G
Never use your machine if some original part or protection be missing.
INMES Industrial Ltda – Double Miter Saw IM-300PL 8