Inmes IM-300PL AL, Руководство оператора

Страница: 56 / 66

INMES Industrial ltda – Double Miter Saw IM-300P/ PL 59
As a solution for cutting different sizes of profiles on the same operation, INMES developed the new Flip-
Flop molding stop.
20 – GET KNOWING THE FLIP-FLOP MOLDING STOP
Before installing the flip-flop molding stop, make sure to identify the components:
01 – Hose (Fig. 01);
02 –Flip Flop Group (Fig. 01);
03 – Handle (Fig. 01);
04 – Cylinder INMES (Fig. 01);
05 – Nut M4 (Fig. 02); 06 – Screw M4x30mm (Fig. 02);
07 – Valve (Fig. 02);
08 – L Connection(Fig. 02);
09 – T Connection (Fig. 02);
10 – Switch (Fig. 03).
Fig. 01 Fig. 02 Fig. 03
21 – ASSEMBLING THE FLIP-FLOP MOLDING STOP
The Flip-Flop molding stop must be assembled by a specialized technician, as well as every repair
may be necessary during the process. Make sure to double check the electric and pneumatic diagram at
the end of this manual.
21.1 – INSTALLING THE FLIP FLOP VALVE
1) By tighten the screws M4x30 and the nut M4, fix the valve 01 (fig. 04). On the external side of the
pneumatic Box, hold the nuts 03 (fig. 05) by using a whrech 8,00mm, as show in fig. 05.
2) With a 4,00mm Allen Key, tighten the screws 02 (Fig. 04) on the internal side of the pneumatic box.
Fig. 04 Fig. 05
D A N G E R