Inmes IM-300PL AL, Руководство оператора

Страница: 21 / 66

6. 6 – Cutting the profile
The IM-300PL provides a lamp for ample view of the internal work area. Use the switch 03 fig. 24 in or-
der to turn the light on.
If it is necessary to change the lamp, have a certified electrician to make the work.
Use compact fluorescent lamp with maximum 15 watts (cold style).
For the operator safety, the general switch 03 on fig 27 leaves the factory on the OFF position. Before
starting the sawblades, please, turned it to the ON position.
Fig. 27 Fig. 28 Fig. 29
Once the general preliminary checks have been carried out, proceed as follow:
1) Turn the machine on pressing the green button 01 (Fig. 27).
2) Position the moulding to be cut on the left hand scale (see Fig. 07 e 08).
3) Press the left pedal and then press the buttons 01 and 02 at the same time (Fig. 28 and 29). (Keep pressed the
pedal as well as the two buttons 01 and 02 until the sawblades descent completely. If you release the pedal and
buttons the sawblade will return to its original position, not finishing the cut);
4) Release the buttons 01 and 02 as well as the pedal. So, it has a perfect square angle.
In order to cut a frame using inner measures (rabbet measure) of 130mm x 130mm, fig. 31 or outer meas-
ure of 255mm x 255mm, proceed as described below:
1)
Place the profile 1 fig. 30 at the desired measure, the example showed in fig. 31 it is 130mm (inner measure of
the frame), or outer measure of the frame 255mm. Observe the line of the rabbet must match with the inner
measure of the frame (130mm) or the external line of the profile must match with the external measure of
the frame (255mm).
2) Move the moulding stop 02 fig. 30 in the profile, without moving the profile;
3) Then tighten the moulding stop.
INMES Industrial Ltda – Double Miter Saw IM-300PL 20