Inmes IM-300PL AL, Руководство оператора

Страница: 27 / 66

Now make the adjustments as described below:
1) By using your hands, verify the belt tension as shown in fig. 48. The belt should flex no more than 10,00 mm
(Fig. 49).
Fig. 48 Fig. 49
2) If the belt tension is more than 10 mm you must loosen the screws 01 fig. 50 which hold the motor.
3) Move the motor in the direction of the arrow (Fig. 51);
4) Observe if the motor pulley is aligned with the pulley;
5) Tighten the screws 01 (Fig. 50);
6) At the end of the operation verify the belt tension as previously explained.
Obs.: Make sure do not misa-
ligned the motor pulley
.
Fig. 50 Fig. 51
7. 3 – Lubrification
The lubrication must be
realized every 40 working
hour with specific grease
for bearings (We do rec-
ommend grease ROCOL
UN2 or similar). There are
grease jets on your saw (01
fig. 53). You should lubri-
cate the bearings in the
blade arms with a grease
gun as shown on item 01
fig. 53
Fig. 52 Fig. 53
INMES Industrial Ltda – Double Miter Saw IM-300PL 26