Inmes IM-300PL AL, Руководство оператора

Страница: 58 / 66

INMES Industrial ltda – Double Miter Saw IM-300P/ PL 61
3) Placed the spare part 01 on the spare part 02, as show in fig. 10.
4) Plug in the wires number 25 and 33 on the spare part 02 and tighten them by using a screwdriver, as shown
in Fig. 11.
Fig. 10
Fig. 11
The other side of the wires 25 and 33 must be plugged in on the Universal Control (Fig. 12).
Fig. 12
22 – WORKING WITH THE FLIP-FLOP MOLDING STOP
The Flip-Flop Molding Stop allows you to cut frames with different side sizes with high productivity and
quality. In order to adjust it, proceed as follow:
!
Place the Flip-Flop molding stop in front of the other molding stop as shown in fig. 13.
!
To work with the flip-flop molding stop, make sure to turn ON the pneumatic Switch as show in Fig. 14.
!
Position the moulding to be cut on the left hand scale.
!
Make a miter cut with the left blade saw. Then, after cutting the profile, the Flip-Flop Molding Stop will
assume its position as shown in Fig. 15.
Fig. 13 Fig. 14 Fig. 15