Inmes IM-300PL AL, Руководство оператора

Страница: 46 / 66

INMES Industrial Ltda – Double Miter Saw IM-300P/ PL 49
4) Identify the itens shown on fig 05.
01 – Extension Table Locker;
02 – Extension Table Adapter;
03 – Screw M6x20 mm;
04 – Washer 3,50 mm.
5) Assembly the parts 01 and 02 as on Fig. 06.
6) With an Allen Key 5,00mm, position the washers and the screws as shown in Fig. 07. Make sure do not
tighten the screws, just placed them.
Fig. 05 Fig. 06 Fig. 07
7) Place the extension table as in Fig. 08 and them position the screws as described on Item 06.
8) Insert the part 01 fig. 09 and move it forward the position which mach with the extension table support
(Fig 10).
9) Then, placed the screw 01 and the washer 02 as show in fig. 10. Make sure do not tighten them.
Fig. 08 Fig. 09 Fig. 10
11 – ALIGNING THE EXTENSION TABLE
Before tighten all screws, align the extension table as shown below:
1) Position a precision ruler 01 (it is not supplied with the machine) against the extension table fence (fig. 11).
After that, tighten all screws making sure that the alignment on the horizontal position it is right as well
(fig. 12). Also, make sure the calibrate scale of the fence mach with the calibrate scale of extension table
as shown in fig. 13.