Inmes IM-300PL AL, Руководство оператора

Страница: 59 / 66

INMES Industrial ltda – Double Miter Saw IM-300P/ PL 62
!
After the first cut, placed the profile 01 (fig. 16) at the desired measure. On the example shown in Fig. 17,
the external smaller side is 255,00mm.
!
Touch the Flip-Flop molding stop 02 (fig. 16) against the profile without move it;
!
Tighten the handle 03 (Fig. 16);
!
Then make the other cut by using the right blade saw.
Fig. 16 Fig. 17
!
Take out the first part of the frame;
!
Move back the molding about 30,00mm in order to avoid waste it;
!
Make the cut with the left saw blade as mentioned above, please, realize that after cutting the flip-flop
molding stop moves backward;
!
Placed the profile to the other external size, on the example shown in fig. 17, 400,00mm
!
Touch the molding stop 04 (fig. 16) against the profile without move it;
!
Tighten the handle 05 (Fig. 16);
!
Make the cut with the right saw blade.
!
Take out the other part of the frame;
!
Repeat the same process as many times as necessary.
Fig. 18