Inmes IM-300PL AL, Руководство оператора

Страница: 50 / 66

INMES Industrial ltda – Double Miter Saw IM-300P/ PL 53
14 – ASSEMBLING THE RIGHT AND LEFT ROLLING ARM EXTENSION IM-300P/ PL
The Rolling Arm Extension IM-300P/ PL 01 (Fig. 01), leaves the factory pre assembled. So, it is just necessary
to assembly it on the machine.
1) Place the extension table 09 (fig. 02) above the ex-
tension table support 02 (fig. 02). Then tigthen the
screws (07), nuts and washers (06) shown in Fig. 02.
2) Place the adaptor 11 (Fig. 02 and 03) on the exten-
sion table as shown in Fig. 02 and also on the ma-
chine, as shown in fig. 03. Then allign the inner side
of the machine´s fence (fig. 07) with the inner side
of the extension table fence. In other words, each
fence needs to matches between then.
Fig. 01
3)
Procced at the same way to assembly the left ex-
tension table. However, instead of align the both
fences, make sure to align the rolls with the inner
side of the machine´s fence.
4) By tighten the screws and washers 01 (fig. 02 and
03) fix the adaptor 11 (Fig. 02 and 03)
Fig. 02
5)
By using the screws 03 (fig. 02) , fix the extension
table support 08 (fig. 02 and 03) on the holes 14
(fig. 03) which are located on the machines base.
6) Then place the screws 04 (Fig. 02) and tighten the
nuts 10 (fig. 02) fixing the extension table support
08 on the table 09 (Fig. 02). Make sure to align the
rolls 04 (fig. 03) with the surface of the fence
(item 05 on fig. 02).
Fig. 03