INIM Electronics SmartLoop, Руководство по программированию

Страница: 69 / 76

Programming Manual
Maintenance operations 69
27.7.1 Loop diagnostic parameters
Press to view the list of devices:
Press keys and to scroll the devices,
or type in the device number.
Press to view the device parameters.
Press keys and to navigate through
the parameters.
Press keys and to navigate through
the devices.
Note:
The parameters depend on the type of device installed, refer to the device instructions for details.
Detectors, IN Modules, OUT
Modules, Sounders, Call Points This is the total of the devices connected to the loop, arranged in
categories.
Average loop contamination This is average contamination level calculated on all the detectors
of the same type.
MAX contamination level
on detector This is maximum percentage of contamination found on the
detector concerned.
Average loop signal deterioration This is average percentage of signal deterioration calculated on all
the loop detectors.
MAX signal deterioration
on point This is maximum percentage of deterioration found on the detector
concerned.
Report Printout Press the key on this option, to printout the data relating to the
configured loops and devices (with addresses other than “255”).
0 0 1 < D e v . T y p e > < D e v . D e s c r i p t i o n >
0 0 2 < D e v . T y p e > < D e v . D e s c r i p t i o n >
0 0 3 < D e v . T y p e > < D e v . D e s c r i p t i o n >
0 0 4 < D e v . T y p e > < D e v . D e s c r i p t i o n >
P o i n t 1 / 0 0 1 < D e v . D e s c r i p t i o n >
T y p e : < D e v . T y p e >
S m o k e : - - -
S e n s i b i l i t y : - - -