Programming Manual
60
Setting up the Internet network
Chapter 23
Setting up the Internet network
(SmartLAN)
The SmartLAN board has a Web application (Janus Network Gateway) that operates as a virtual
control panel. The console (keypad, display and LEDs) allows operators (e.g. Maintenance
technicians) to connect to the control panel via any Internet browser, view the control panel and work
on the system. This virtual control panel allows operators to carry out software maintenance work
from remote locations.
Besides operating as the Janus Network Gateway, the SmartLAN board also has the task of
transmitting e-mails and event reports to the specified websites (for example, monitoring stations or
other web applications) generated by the actions defined during the programming phase of the
SmartLoop/PSTN board (refer to paragraph 22.2 Setting up the telephone actions).
23.1 Setting up the Internet connection parameters
FROM COMPUTER
Go to SmartLoop System, Control panel x, frontplate console, SmartLAN, System Programming
This option will allow you to define the parameters that:
• allow the control panel Internet “visibility”;
• allow the control panel to communicate with the mail server;
• determine (for each telephone action) which e-mail message must be transmitted to which contact
phone number, and the IP addresses must receive the event that generated the telephone action.
Note:
Ask your network administrator or Internet provider for help.
23.1.1 Parameters
FROM PANEL
Not available.
IP Address
Static IP Address of the control panel.
Net mask
Ask your network administrator or Internet provider for help.
Gateway
DNS
Mail Server output
(SMTP)
Name of the server for electronic out-mail (e.g.
“smtp.<Servername>.it”).
Port
Out-mail server port 25 at default.
e-mail address of sender (real name or nickname) associated with the
control panel. Used only as sender ID and not for managing replies.
<e-mail table>
Phonebook for the addresses of the e-mails sent by the SmartLAN.
<IP Address table>
Phonebook containing potential IP addresses and respective protocols
for SmartLAN event report transmissions.
<Telephone Actions table>
For each telephone action you can: prepare an e-mail and specify th e
receiver select, or select an IP address that will receive the event
report.
Содержание SmartLoop
Страница 1: ...SmartLoop Analogue Fire Alarm Control Panel Programming Manual GameOver...
Страница 6: ...Programming Manual 6...
Страница 75: ...Programming Manual 75 Programmer s notes...