INIM Electronics SmartLoop, Руководство по программированию

Страница: 66 / 76

Programming Manual
66 Maintenance operations
Chapter 27
Maintenance operations
The following maintenance operations can be implemented by installers or authorized technicians only
(Level 3) who can:
1. By means of a screw driver or similar tool, remove the screws and open the control panel cabinet.
2. Connect the programming jumper J2 PROGRAM.
3. Type in a valid access code: the control panel will allow access to the maintenance functions.
27.1 Testing/Enabling a zone
FROM COMPUTER
Not available.
During zone Test status, detectors and other signaling devices associated with the zone will be unable
to generate faults, alarms or signals. Activation of a detector during zone test status will light its LED,
which will reset automatically. This feature allows operators to test the system devices without moving
away from the panel.
FROM PANEL
<any key>, 7 Maintenance, <code>, 1 Zone in TEST Mode,
or <any key>, 7 <code> 1
Press keys and to view the data of
the adjacent zones.
Press ESC to confirm the entry and step
back to the previous menu.
Note:
Testing/Enabling a zone involves testing/enabling all the zone points (detectors).
27.2 Testing/Enabling a detector
FROM COMPUTER
Not available.
During test status, the detector will be unable to generate faults, alarms or signals. Activation of a
detector during test status will light its LED, which will reset automatically. This feature allows
operators to test the system devices without moving away from the panel.
FROM PANEL
<any key>, 7 Maintenance, <code>, 2 Point in TEST Mode, x Loop x,
yyy detector,
or <any key>, 7 <code> 2 x yyy
Press keys and to view the adjacent
detectors.
Press ESC to confirm the entry and step
back to the previous menu.
Z o n e y y y < Z o n e D e s c r i p t i o n >
S T A T U S : _ o r m a l M o d e
= S e l e c t Z o n e = T e s t O N / O F F
P o i n t x / y y y < D e s c r i p t i o n >
T y p e : < D e v i c e T y p e >
S T A T U S : _ o r m a l M o d e
= S e l e c t P o i n t = T e s t O N / O F F