manualshive.com logo in svg

Ingersoll-Rand MHP825WCAT, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Ingersoll-Rand MHP825WCAT Скачать руководство пользователя страница 64

Operation & Maintenance Manual

Maintenance

62

 

Prior to attempting any maintenance work on a running machine, ensure that:–

•

the work carried out is limited to only those tasks which require the machine to run.

•

the work carried out with safety protection devices disabled or removed is limited to
only those tasks which require the machine to be running with safety protection
devices disabled or removed.

•

all hazards present are known (e.g. pressurised components, electrically live
components, removed panels, covers and guards, extreme temperatures, inflow and
outflow of air, intermittently moving parts, safety valve discharge etc.).

•

appropriate personal protective equipment is worn.

•

loose clothing, jewellery, long hair etc. is made safe.

•

warning signs indicating that 

Maintenance Work is in Progress 

are posted in a

position that can be clearly seen.

Upon completion of maintenance tasks and prior to returning the machine into service, 
ensure that:–

•

the machine is suitably tested.

•

all guards and safety protection devices are refitted.

•

all panels are replaced, canopy and doors closed.

•

hazardous materials are effectively contained and disposed of.

Protective Shutdown System

Refer to the Wedge diagnostic display codes table for a listing of shutdown conditions.

Low Engine Fuel Level Switch

At three month intervals, test the low engine fuel level switch circuit as follows:

•

Start the machine.

NOTE: Do not press the load button.

•

Disconnect the switch, the machine should shutdown.

•

Re–connect the switch.

At twelve month intervals, test the low engine fuel level switch by removing and operating the 
float manually.

Содержание MHP825WCAT














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды