Ingersoll-Rand MHP825WCAT, Руководство по эксплуатации и техническому обслуживанию

Страница: 104 / 109

Operation & Maintenance Manual Parts Ordering
102
Parts Ordering
General
This publication, which contains an illustrated parts breakdown, has been prepared as an aid
in locating those parts which may be required in the maintenance of the unit. All of the
compressor parts, listed in the parts breakdown, are manufactured with the same precision as
the original equipment. For the greatest protection always insist on genuine Ingersoll–Rand
Company parts for your compressor.
NOTICE
Ingersoll–Rand Company can bear no responsibility for injury or
damages resulting directly from the use of non–approved repair parts.
Ingersoll–Rand Company service facilities and parts are available
worldwide. There are Ingersoll–Rand Company Construction Equipment
Group Sales Offices and authorized distributors located in the principle
cities of the United States. In Canada our customers are serviced by the
Canadian Ingersoll–Rand Company, Limited. There are also Ingersoll–
Rand International autonomous companies and authorized distributors
located in the principle cities throughout the free world.
Special order parts may not be included in this manual. Contact the
Mocksville Parts Department with the unit serial number for assistance
with these special parts.
Description
The illustrated parts breakdown illustrates and lists the various assemblies, subassemblies
and detailed parts which make up this particular machine. This covers the standard models
and the more popular options that are available.
A series of illustrations show each part distinctly and in location relative to the other parts in
the assembly. The part number, the description of the part and the quantity of parts required
are shown on each illustration or on adjacent page. The quantities specified are the number
of parts used per one assembly and are not necessarily the total number of parts used in the
machine. Where no quantity is specified the quantity is assumed to be one.
Each description of a part is based upon the “noun first” method, i.e., the identifying noun or
item name is always the first part of the description. The noun name is generally followed by
a single descriptive modifier. The descriptive modifier may be followed by words or
abbreviations such as upper, lower, inner, outer, front, rear, RH, LH, etc. when they are
essential.