manualshive.com logo in svg

Ingersoll-Rand MHP825WCAT, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Ingersoll-Rand MHP825WCAT Скачать руководство пользователя страница 40

Operation & Maintenance Manual

Operating Instructions

38

 

Operating Instructions

Commissioning

Upon receipt of the unit, and prior to putting it into service, it is important to adhere strictly to 
the instructions given below in 

PRIOR TO STARTING

.

Ensure that the operator reads and 

understands

 the decals and consults the manuals before 

maintenance or operation.

Ensure that the position of the 

emergency stop

 device is known and recognised by its 

markings. Ensure that it is functioning correctly and that the method of operation is known.

Before towing the unit, ensure that the tyre pressures are correct (refer to the 

GENERAL 

INFORMATION

 section of this manual) and that the handbrake is functioning correctly (refer 

to the 

MAINTENANCE

 section of this manual). Before towing the unit ensure that the lights 

are functioning correctly (where fitted).

Ensure that all transport and packing materials are discarded.

Ensure that the correct fork lift truck slots or marked lifting/tie down points are used whenever 
the machine is lifted or transported.

When selecting the working position of the machine ensure that there is sufficient clearance 
for ventilation and exhaust requirements, observing any specified minimum dimensions (to 
walls, floors etc.).

Adequate clearance needs to be allowed around and above the machine to permit safe access 
for specified maintenance tasks.

Ensure that the machine is positioned securely and on a stable foundation. Any risk of 
movement should be removed by suitable means, especially to avoid strain on any rigid 
discharge piping.

Attach the battery cables to the battery(s) ensuring that they are tightened securely. Attach the 
negative cable before attaching the positive cable.

WARNING

!

All air pressure equipment installed in or connected to the machine must
have safe working pressure ratings of at least the machine rated
pressure, and materials compatible with the compressor lubricant (refer
to the GENERAL INFORMATION section).

Содержание MHP825WCAT














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды