SKYZER TECHNOLOGIES
PAGE 96 OF 147
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Version 1.00
11.8 EMV Chip Card Transaction
An EMV chip/smart card is a plastic payment card with an embedded
microprocessor.
When processing EMV chip card transactions, merchants and cardholders
have the choice of either a PIN or signature transaction. The iCT250 terminal
supports pin bypass should this function be required.
Step
Terminal Display
Description
1.0
PAYMARK EFTPOS
1.EFTPOS MENU
2.TIPPING MENU
3.HOSPITALITY MENU
4.ADMIN MENU
5.SUPERVISOR MENU
Press
MENU
key and then scroll through using down arrow key until
EFTPOS
MENU
is shown on the display.
Press the corresponding number key or
ENTER
to
access EFTPOS menu.
2.0
EFTPOS MENU
1.PURCHASE
2.CASH
3.REFUND
Press the corresponding number key or down arrow key to select
PUR
to perform a
purchase transaction.
3.0
PURCHASE AMOUNT?
$X.XX
Key in the purchase amount and press
ENTER
4.0
CASH OUT AMOUNT?
$0.00
Only applicable if the CASH OUT is turned on.
Press
ENTER
to bypass
“CASH OUT”
.
5.0
PRESENT / INSERT
OR SWIPE CARD
$XX.XX
Insert the cardho
lder’s chip card i
nto the chip card reader at the front of the
terminal.
NOTE:
The chip card must remain in the terminal until the
‘REMOVE CARD’
prompt is displayed. If the card is removed to early the transaction will be
cancelled.
6.0
AWAITING ACCOUNT
The terminal prompts
AWAITING ACCOUNT
on the terminal. Advise the
cardholder to select their account type on the pinpad.
7.0
ACCOUNT $XX.XX
CHQ SAV CR
F1 F2 F3 F4
The cardholder presses the corresponding soft key to select their account type.
Example:
Press F4 to select CR
8.0
AWAITING PIN
The terminal prompts
AWAITING PIN
on the terminal. Advise the cardholder to
key in their PIN on the pinpad.
