SKYZER TECHNOLOGIES
PAGE 27 OF 147
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Version 1.00
1.0
Press
FUNC
2.0
FUNCTION?
Enter
3824
and press
ENTER.
3.0
CONFIG PARAMS?
ENTER OR CLEAR
ENTER
to configure the parameters or
CLEAR
to cancel and exit to idle prompt.
4.0
TERMINAL ID?
XXXXXXXX
This parameter specifies the Terminal ID assigned by Paymark. Key in the 8 digit
terminal ID and press
ENTER
.
5.0
MERCHANT ID?
XXXXXXXXXXX
This parameter specifies the Merchant ID assigned by Paymark. Merchant ID will be
automatically configured once terminal ID is keyed in. Press ENTER to confirm the
merchant ID is correct and if not, it can be manually over written.
6.0
NII?
001
This parameter specifies the Network International Identifier (
by default 001
) that
the terminal uses to route messages to Paymark. Press
ENTER.
7.0
COMMS MODE?
1-DIAL-UP
Select the preferred COMMS mode by pressing the corresponding number key. By
default
1-TCP-IP
is always selected.
Press
1
for
Dial-up configuration
followed by
ENTER
and proceed with the
configuration.
2-TCP-IP / DIAL
Press
2
for
TCP-IP/Dialup as backup configuration
followed by
ENTER
and
proceed with the configuration.
3-TCP-IP
Press
3
for
TCP-IP configuration
followed by
ENTER
and proceed with the
configuration.
4-GPRS
Press
4
for
GPRS configuration
followed by
ENTER
and proceed with the
configuration.
5-GPRS / DIAL
Press
5
for
GPRS/Dialup as backup configuration
followed by
ENTER
and
proceed with the configuration.
6-TCP-IP / GPRS
Press
6
for
TCP-IP/GPRS as backup configuration
followed by
ENTER
and
proceed with the configuration.
7-TCP-IP/GPRS/DIAL
Press
7
for
TCP-IP/GPRS/DIAL as backup configuration
followed by
ENTER
and proceed with the configuration.
8-DIAL/GPRS
Press
8
for
DIAL/GPRS as backup configuration
followed by
ENTER
and
proceed with the configuration.
5.1.1
Dial-Up Configuration
1.0
QUICK DIAL?
1-YES 2-NO
This parameter sets up the speed of the terminal to dial. By default is selected as
1-
YES
or press
2-NO
to disable quick dial.
