SKYZER TECHNOLOGIES
PAGE 53 OF 147
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Version 1.00
3.0
MULTI MERCHANT
SETUP
Terminal is now in configuration mode. Go to following Steps to proceed or Press
CANCEL
to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
4.0
MULTI MERCHANT
SETUP
Select
option 5
for
RKI configuration
by pressing the corresponding number key.
5.0
RKI CONFIG?
ENTER OR CLEAR
Press
ENTER
to proceed with the RKI configuration or
CLEAR t
o cancel and exit to
idle screen
6.0
NII?
018
This parameter specifies the Network International Identifier that the terminal uses
to route messages to Paymark.
Press
ENTER.
7.0
RKI PHONE NO?
08797
This parameter specifies the Phone number of the Paymark Host, where it will be
connecting to download the keys. By default, the RKI phone number is set as
08797.
NOTE: If the merchant has the Toll Bar on the site, then key in this phone
number 1797 to obtain connectivity to Paymark network.
8.0
MULTI MERCHANT
SETUP
Terminal is now in configuration mode. Press
CANCEL
to exit, otherwise the
terminal will automatically exit after 30 seconds of inactivity
5.6.2
TCP-IP (Broadband)
RKI
Configuration
Step
Terminal Display
Description
1.0
Press
FUNC
2.0
FUNCTION?
Enter
7418
, press
ENTER
3.0
MULTI MERCHANT
SETUP
Terminal is now in configuration mode. Go to following Steps to proceed or Press
CANCEL
to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
4.0
MULTI MERCHANT
SETUP
Select
option 5
for
RKI configuration
by pressing the corresponding number key.
5.0
RKI CONFIG?
ENTER OR CLEAR
Press
ENTER
to proceed with the RKI configuration or
CLEAR t
o cancel and exit to
idle screen
