SKYZER TECHNOLOGIES
PAGE 113 OF 147
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Version 1.00
3.0
RETRIEVE BY
1. TRAN NUMBER
2. CARD NUMBER
3. AUTH NUMBER
4. INITIAL AUTH AMT
5. FUNDS ON HOLD
Select the desired search criteria by pressing the corresponding number on the
terminal to retrieve stored hospitality transaction.
Example: 1 for
TRAN NUMBER
4.0
ENTER TRAN NUM
Enter the transaction number which can be obtained from the receipt.
Example: 000001
5.0
TRAN XXXXXX
AUTH XXXXXX
CARD XXXXXX....XXXX
TOTAL AMT NZ$XX.XX
REQUIRED TRANS. Y/N
Details of selected transaction are displayed.
Press
ENTER
to print the pending transaction.
Press
CLEAR
to exit and return to previous screen.
NOTE:
The total amount displayed will include the previously authorised amount
plus any top-up amounts already processed for this transaction. This is to notify
the merchant that a top-up transaction was performed.
6.0
AUTH AMT $XX.XX
FINAL AMOUNT?
$0.00
Key in the amount to be finalised then press
ENTER.
This can be greater or
lesser than the authorised amount.
7.0
PRINTING
PRINTING
will be displayed on the terminal while printing off the receipt for the
cardholder to sign. Advise the cardholder to sign the receipt to accept the
transaction with the final amount.
8.0
PROCESSING NOW
PROCESSING NOW
will be displayed on the terminal while processing the
transaction and will print off receipt where cardholder has to sign to accept the
transaction.
9.0
SIGN RECEIPT
SIGN RECEIPT
will be displayed on both terminal and pinpad screen. Tear the
receipt off and ask the cardholder to sign receipt.
10.0
SIGNATURE OK? Y/N
ENTER=YES,CLR=NO
Verify the cardholder’s signature with the signature on the back of
the card. If
the signature matches:
Press
ENTER
to accept and proceed with
step 11.0
If not, press
CLEAR
to decline and proceed with
step 12.0
11.0
SIG ACCEPTED
SIG ACCEPTED
will be displayed on both the terminal and pinpad screen. The
merchant presses
ENTER
to accept the cardholder’s signature aft
er verifying
signature with the card.
12.0
SIG DECLINED
SIG DECLINED
will be displayed on both the terminal and pinpad screen. The
merchant presses
CLEAR
to decline the cardholder’s signature after veri
fying
signature with the card.
