manualshive.com logo in svg

INGENIA Titan GO, Руководство по эксплуатации продукта

Поделиться
Скачать
INGENIA Titan GO Скачать руководство пользователя страница 24

TITAN GO Product Manual | 

Connectors Guide

INGENIA | 2022-07-14 08:35:14

24

Multi-core crimped cable mating

Image

Crimp terminals

Description

Micro-Fit™ Crimp Terminal, Female, Tin, Lead free

Image

Part number

Molex 43030-0001

Distributor codes

Farnell 

1462526 / 

Digi-Key 

WM1837CT-ND / 

Mouser 

538-43030-0001-CT

Pre-assembled wires

Description

20-24 AWG pre-crimped jumper cable (50.8 mm).

Note: there are many lengths and colors available at 

Digi-Key

.

Image

5.4  P1: Aux supply connector

Titan GO is self supplied from the DC bus using an internal DC/DC converter that starts at 60 V and works up to 850 
V.

However, some applications require an independent auxiliary power supply to work with the power off. This can be 
done with connector P1.

This connector also includes a +24 V output that can be used for fans, relays or for STO circuits.

Содержание Titan GO













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды