User Manual V1.3 | XtracontrolDC2, XtracontrolET2, XtracontrolEC21
The automation system must only be used:
as intended;
in a technically perfect condition;
without any unauthorised modifications;
by qualified users.
▶
Observe the rules of the employer’s liability insurance association, the technical inspectorate, and the VDE
(Association of German Electrical Engineers) or corresponding country regulations.
The device is intended for installation within enclosed control cabinets of industrial machines and systems in indoor
areas.
▶
When installing the device, check that the seal profiles are undamaged.
▶
For operation, refer to the applicable statement of ambient conditions (see “Technical data”).
1.7
Transport and storage
The device is susceptible to impacts, heavy vibration, moisture and extreme temperatures.
Transport and storage
▶
Protect the device against major mechanical stresses during transport.
▶
Always pack the device in its original packaging for transport.
▶
For storage, refer to the applicable statement of ambient conditions (see “Technical data“).
▶
Protect the device against condensation and damp.
Operation
▶
If the device has been stored or transported in cold weather or under conditions or large fluctuations in
temperature, do not start to operate it until it has acclimatised to room temperature for the place it is used.
▶
If condensation is present, wait at least 12 hours before starting to operate the device.
1.8
Unpacking
Or receipt of the device, a check must be made that it is complete and undamaged.
1.
Check the packaging for external damage.
2.
If the packaging is seriously damaged or if damage to the contents is evident: Do not proceed further with
opening the packaging, instead immediately inform the transport company and your supplier.
3.
Remove the packaging and keep it safe for subsequent transport.
4.
Check the contents for evidence of damage in transport.
5.
Check the contents for completeness against the order documentation and keep all the delivery
documentation for future reference. The delivery documentation contains important information about the
device and is part of the product.
6.
If you discover damage in transport or the contents do not match the order: Inform the supplier immediately.
© Infranor GmbH
9
Содержание Xtracontrol DC2
Страница 1: ......
