inform InfoSTS, Руководство пользователя

Страница: 9 / 47

-
8
-
VIEW OF THE CONTROL PANEL
On the front panel of STS there are LEDs, control buttons and a two line alphanumeric LCD display. These
components interact with each other during STS operation. Buttons change menus and submenus on LCD
display. LEDs show the switching position of the STS on a mimic diagram.
figure – 5
STS front panel
On : source 1 is preferred source
1 Source 1 priority lamp
Off : source 1 is alternate source
On : source 2 is preferred source
2 Source 2 priority lamp
Off : source 2 is alternate source
On: source 1 input is OK
SW1 Source 1 input monitor lamp
Off : source 1 input failed
On: source 2 input is OK
SW2 Source 2 input monitor lamp
Off : source 2 input failed
On: SS1 SCR group fired
SS1
Source 1 static switch on lamp
S1 static switch on
Off : SS1 SCR group open
On: SS2 SCR group fired
SS2
Source 2 static switch on lamp
S6 static switch on
Off : SS2 SCR group open
On : output normal
Off : output switch off
SW3 Output monitor lamp
Flash : output voltage inhibit
Flash : previously an alarm occurred
Alarm monitoring lamp
Off : there is no alarm on STS
Down button Moves menu item to 1 level down
Enter button Validates the adjusted data or OK confirmation
(+) button Increases the current data
(-) button Decreases the current data