inform InfoSTS, Руководство пользователя

Страница: 7 / 47

-
6
-
SAFETY WARNINGS
IMPORTANT NOTICES
1. This Manual must be carefully read before applying any power to the STS unit.
2. All warnings in the manual should be adhered to.
3. All operating instructions should be followed.
4. The unit should be supplied by a grounded outlet. Do not operate the unit without ground source.
5. Power input cords of the STS should be routed carefully so that they are not to be walked on.
6. Please save this manual.
7. Please save or recycle the packaging materials.
WARNING !!!
•
Do not apply electrical power to the STS equipment before arrival of authorized service personnel.
•
Installation and commissioning of STS must be performed by a qualified technician.
•
Adequate protection against input over currents must be provided, considering the nominal current rating of
the STS.
•
Do not insert any object into ventilation holes or other openings.
•
To reduce the risk of fire or electric shock, install the unit in temperature and humidity controlled indoor area
free of flammable and corrosive substances.
•
The unit have two power inputs ,if one of the supplies is connected risk of electric shock is valid.
•
The unit is powered by more than one power mains. When one of the incoming power sources is active, the
unit contains a dangerous level of voltage, even when it is in “MAINTENANCE BYPASS” position
WARNING !!!
•
Since it is a high voltage equipment, INFOSTS contains dangerously high voltages. The risk of
contact with these voltages is minimized using a lockable hinged door and internal safety shields in
accordance with IP20 standards.
•
All maintenance and installation procedures requiring access to the inside of the device must be
exclusively performed by a trained personnel.
•
InfoSTS DOES NOT HAVE AUTOMATIC PROTECTION AGAINST VOLTAGE RETURNING TO THE
INPUT. POWER SWITCHES OR FUSES OUTSIDE THE STS MAY HAVE VOLTAGES ON THEIR
CONNECTION TERMINALS EVEN WHEN THEY ARE TURNED OFF.
•
SERVICE PERSONNAL MUST INSULATE THE STS (BY TURNING OF ITS INPUT SWITCHES S1 AND
S2) BEFORE WORKING ON THESE EQUIPMENT.
CAUTION !!!
•
Installation and commissioning of this device must be performed by qualified service personnel
trained and authorized by the manufacturer (or distributor)
•
Risk of electric shock, do not remove cover. No user serviceable parts inside, refer servicing to
qualified service personnel.
•
Risk of electric shock, hazardous live parts inside .