English
a) Do not force the power
tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer
at the rate for which it was
designed.
b) Do not use the power
tool if the switch does
not turn it on and off. Any
power tool that cannot be
controlled with the switch
is dangerous and must be
repaired.
c) Disconnect the plug from
the power source and/or
the battery pack from the
power tool before making
any adjustments, changing
accessories, or storing
power tools. Such preven-
tive safety measures reduce
the risk of starting the power
tool accidentally.
d) Store idle power tools
out of the reach of children
and do not allow persons
unfamiliar with the power
tool or these instructions to
operate the power tool.
Power tools are dangerous
in the hands of untrained
users.
e) Maintain power tools.
Check for misalignment or
binding of moving parts,
breakage of parts and any
other condition that may
affect the power tool’s
operation. If damaged,
have the power tool repai-
red before use. Many acci-
dents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp
and clean. Properly main-
tained cutting tools with
sharp cutting edges are less
likely to bind and are easier
to control.
g) Use the power tool, ac-
cessories and tool bits
etc. in accordance with
these instructions, taking
into account the working
conditions and the work to
be performed. Use of the
power tool for operations
different from those inten-
ded could
result in a hazardous situa-
tion.
- Not to use guns to spray
flammable materials
- Be aware of any hazards
presented by material being
sprayed and please, consult
the markings on the con-
tainer or the information
supplied by manufacturer of
the material to be sprayed
- Not spray any material
where the hazard is not
known
- Not clean the gun with
flammable solvents
Please, handle the unit du-
ring use always as below
picture:
9