IndigoVision 9000 Series, Руководство пользователя

Страница: 26 / 68

26 User Guide - v7
You may need to change the Ethernet link type default value from Auto-negotiate for
some network devices. If you have problems maintaining a network link, contact your
system administrator to determine the appropriate setting.
This setting must match the setting on the switch port that the device will be connected to.
Otherwise, poor network performance may be experienced.
• Reset Network Security to factory defaults (y/n) ? — Enter y to reset the device's
password and network security settings. This will enable unrestricted access to the
configuration pages, and is the only way to reset the password on the device. Enter
n if
you do not want to make changes to the device's network security.
If you have more than one device, repeat these steps for each one.
You are now ready to attach the device(s) to the network.
Attaching the device to the network
After configuring the device’s IP settings, you must attach it directly to your network using an
available network port.
Use a standard RJ45 connector and CAT5 cable to connect to the network socket in the
device.
Power Supply
(not required
for PoE)
Fixed
Dome
PC
Network
Figure 18: Connecting the device to the network
3 Getting Started Enhanced SD Fixed Dome - 9000 Range