Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
43
of
170
Rev 1.0
GreyHorizontalRampMoving:
Image is filled horizontally
with digital pattern that goes from the darkest possible
value to the brightest and that moves horizontally from
left to right at each frame.
GreyVerticalRampMoving:
Image is filled vertically with
digital pattern that goes from the darkest possible value
to the brightest and that moves vertically from top to
bottom at each frame.
FlatField:
Displays a constant grey level for all display
pixels.
IpxGevPattern:
GEV engine firmware generate an image.
4
Sensor Test Pattern
values:
Mode0:
The sensor test image is filled with a vertical
stripe pattern of one pixel width. Values are:
12-bit: FFFh/555h/AAAh/000h
10-bit: 3FFh/155h/2AAh/000h
8-bit: FFh/55h/Aah/00h
This ensures that the connection between the sensor and
FPGA is synchronized.
*For color cameras, make sure that
BalanceRatio
is set to
1.0 and
BalanceWhiteAuto
is Off.
Mode1:
The sensor test image is filled horizontally with
digital pattern that goes from the darkest possible value
to the brightest.
This ensures that the connection between the sensor and
FPGA is synchronized.
