Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
133
of
170
Rev 1.0
9.
If necessary, set
Strobe2Delay
.
Without a delay, the strobe occurs simultaneously with the start of exposure.
10.
Set
Strobe2Width
to a desired value.
Trigger
Exposure time
Exposure N
Exposure N+1
N
N+1
Readout N
Readout N+1
Readout time
Strobe 1
(Strobe1Reference:
Trigger or Exposure)
Strobe 2
(Strobe2Reference:
Readout)
Strobe 1
delay
Strobe 2
delay
Strobe 1 period = Trigger period
Strobe 1
width
Strobe 2
width
Strobe 2 period = Trigger period
Trigger active
edge – Rising
GenICam controls
TriggerMode:
On
TriggerOverlap:
Off
TriggerSource:
Line 1
(or Line2, Pulse Generator)
TriggerActivation:
Rising Edge
(or Falling Edge)
TriggerDelay:
0
(no delay)
TriggerFilterTime, TriggerDebounceTime:
set if applicable
LineSelector:
Output1
(or Output2)
LineSource:
Strobe1
(or Strobe2)
Strobe1Reference:
Trigger
(or Exposure)
Strobe1Enable:
On
Strobe1Width:
User-specified
(in
µ
s)
Strobe1Delay:
User-specified
(Min.= 10
µ
s)
Strobe2Reference:
Readout
Strobe2Enable:
On
Strobe2Width:
User-specified
(in
µ
s)
Strobe2Delay:
User-specified
(Min.= 10
µ
s)
Exposure Mode:
Timed
For manual exposure control:
Exposure Time:
User-specified
(Min.= 36
µ
s; Max = Readout time)
ExposureAuto:
Off
For automatic exposure control (AEC):
ExposureAuto:
Continuous
(or Once)
Parameters of the strobe signal
Strobe period = Trigger period
Strobes Positioned with Respect to a Trigger, Exposure Start, or Readout Start
Standard Trigger Mode
