BOBCAT HD-SDI
Hardware User’s Manual
Imperx, Inc.
Rev. 1.4
6421 Congress Ave.
6/2/2014
Boca Raton, FL 33487
+1 (561) 989-0006
50 of 175
2.9.
I/O CONTROL
2.9.1.
I/O Mapping
The camera has 1 external Tri-Level sync input and 2 external outputs wired to
the 12 pin HIROSE connector, located on the back of the camera – please refer
to Table 1.8 for more information. The user can map camera inputs to:
Exposure Start, Exposure End, Mid-Exposure, Active Exposure Window, H or,
V Sync, Odd/Even Frame Flag, Camera Ready, Pulse Generator, Strobe One,
Strobe Two. For each mapped signal active “High”, active “Low”, can be
selected. All possible mapping options for the camera inputs and outputs are
shown in Table 1.11 and Table 1.12 respectively.
Note:
CC1/CC2 is not available in HD-SDI cameras.
Input Signals
IN1
IN2
Tri-Level sync
Table 1.11 – BOBCAT Input Mapping.
Output Signals
OUT1 OUT2
Exposure Start
Exposure End
Mid-Exposure
Active Exposure Window
H-Sync
V-Sync
Odd/Even Frame Flag
Pulse Generator
Strobe One
Strobe Two
Table 1.12 – BOBCAT HD-SDI Output Mapping.
