BOBCAT HD-SDI
Hardware User’s Manual
Imperx, Inc.
Rev. 1.4
6421 Congress Ave.
6/2/2014
Boca Raton, FL 33487
+1 (561) 989-0006
30 of 175
The female 12-pin HIROSE connector provides Camera Control via an RS232
serial interface and outputs Lens Control signals for Zoom, Focus, and Iris for
a standard Type 1 (6V) or Type 5 (12V) C-Mount motorized lens. Refer to Fig
1.10 for connector pin-outs. Refer to Table 1.9 for corresponding pin mapping.
The connector is a female HIROSE type miniature locking receptacle
#HR10A-10R-12SB(71). The male HIROSE mating plug part number is
#HR10A-10P-12P(73).
Figure 1.10 – HD-SDI Camera Serial/Lens Control Pin-Outs (Rear view)
Pin
Signal
Type
Description
1
RS-485
Ground Return
RS-485_COM
2
RS-485
Positive
RS-485 +
3
RS-485
Negative
RS-485 -
4
IRIS(1)
Iris Closes
DC -
5
IRIS(2)
Iris Opens
DC +
6
FOCUS(1)
Focus Near
DC -
7
FOCUS(2)
Focus Far
DC +
8
ZOOM(1)
Zoom Wide
DC -
9
ZOOM(2)
Zoom Narrow
DC +
10
RS-232
Ground Return
RS-232_COM
11
RS-232
Receive
RS-232_RX
12
RS-232
Transmit
RS-232_TX
Table 1.9 – HD-SDI Serial/Len Control Pin Mapping.