BOBCAT HD-SDI
Hardware User’s Manual
Imperx, Inc.
Rev. 1.4
6421 Congress Ave.
6/2/2014
Boca Raton, FL 33487
+1 (561) 989-0006
133 of 175
desired window size by typing the numbers directly, or by
selecting the desired size in the provided gray square window.
To do this enable the window first, press the corresponding
numerical number on the keyboard, and then draw the window
with the mouse in the gray square. Different AOIs will be
displayed with different colors.
5.7.7.
Strobe Control
This window sets the camera strobe signals. Two independently controlled
strobe signals are supported – Figure 5.16.
Figure 5.16 – Strobe Control window.
Strobe 1 Mode:
Sets the Strobe 1 mode of operation. The strobe can be
disabled or enabled. When enabled the strobe can be set to
appear “Each Frame”, “Odd Frames” only or “Even
Frames” only. In addition, in trigger mode, the user can add
a strobe pulse associated with rising edge of the trigger
pulse.
Strobe 2 Mode:
Sets the Strobe 2 mode of operation. The strobe can be
disabled or enabled. When enabled the strobe can be set to
appear “Each Frame”, “Odd Frames” only or “Even
Frames” only. In addition, in trigger mode, the user can add