BOBCAT HD-SDI
Hardware User’s Manual
Imperx, Inc.
Rev. 1.4
6421 Congress Ave.
6/2/2014
Boca Raton, FL 33487
+1 (561) 989-0006
138 of 175
using the horizontal (bottom) slider (left portion). Set the
desired Y1-point level using the vertical (side) slider (bottom
portion).
Two Point Correction
– two-point image enhancement
operation will be performed. Set the desired X1-point level
using the horizontal (bottom) slider (left portion), and X2-
point – the horizontal (bottom) slider (left portion). Set the
desired Y1-point level using the vertical (side) slider (bottom
portion), and Y2-point – the vertical (side) slider (top portion).
Side Slider
:
Multi purpose dual slider, controls the Y1 and Y2 positions
for single and two-point image enhancement.
Bottom Slider
: Multi purpose dual slider, controls the X1 and X2 positions
for single and two-point image enhancement. Controls the
lower and upper threshold levels for single and dual threshold.
Gray Box:
Multi purpose graphical interface. The user can set the desired
X1, (X1,X2), (X1,Y1) or (X2,Y2) points directly. Grab with
the mouse the yellow dots (dot) and move them in the gray
square window until the desired result is achieved.
5.7.10
Data Output
Data Output window provides full control of the camera digital data output –
Figure 5.19.
Figure 5.19 – Data output window.
Corrections:
FFC
– enables Flat Field Correction (FFC). Each HD-SDI
camera comes with a built-in Flat Field Map (FFM) to
compensate for shading effects intrinsic to the imager. The
user can upload load a custom FFM.