IMO Precision Controls Jaguar VXS, Руководство пользователя

Страница: 18 / 67

16
At Power-on
When power is switched on, the 7-segment
LEDs display flashes together with the (red)
‘Hz’ LED below it if the inverter is in the as-
delivered condition, and the (green) Panel
Control LED also illuminates, not flashing.
The 7-segment LEDs display normally shows
the value set in Function 03 (max. output fre-
quency). The frequency output can be
changed to current, voltage, speed (rpm) or
line speed (m/min). Refer to ‘Changing the
Inverter Output Display’ in the next column.
When one of these has been selected and the
inverter switched off, that same output will
appear at the next power-on.
Keypad Mode
The inverter is factory-set in Keypad Mode
(Functions 01 = 0 and 02 = 0) and is locked
into that mode by the standard link applied to
terminal P24-FWD. If it is desired to oper-
ate the inverter in Terminal Mode, this link
must first be removed before either
Function 01 or Function 02 can be changed.
Functions 01 and 02 can be changed indepen-
dently of each other.
Changing the Inverter Output Display
6 Keypad Functions
6.1 Keypad 6.2 Keypad Procedures
PANEL
CONTROL PRG MODE RUN
Hz A V
r/min m/min
PRG
RESET
RUN
FUNC
DATA
STOP
PANEL
CONTROL PRG MODE RUN
Hz A V
r/min m/min
PANEL
CONTROL PRG MODE RUN
Hz A V
r/min m/min
Motor
current
PANEL
CONTROL
PRG MODE RUN
Hz A V
r/min m/min
Output
voltage
PANEL
CONTROL PRG MODE RUN
Hz A V
r/min m/min
Motor
speed
PANEL
CONTROL PRG MODE RUN
Hz A V
r/min m/min
Line
speed
FUNC
DATA
PRESS
FUNC
DATA
PRESS
FUNC
DATA
PRESS
FUNC
DATA
PRESS
FUNC
DATA
PRESS
Illuminated in RUN mode
Flashing in STOP mode
Illuminated
(not flashing)
in RUN mode