PRG/RESET key
•
RUN mode or STOP mode
In either keypad mode or terminal mode, and
provided that the inverter is not in a TRIP
condition, the PRG/RESET key sets the
inverter into PROGRAM mode, allowing the
operator to select the menu of Inverter
Functions (Chapter 7).
When PRG mode is selected, the LED display
shows the Function available, eg F 00, and all
three red LEDs below it illuminate in RUN
mode or flash in STOP mode.
For the explanation of procedures and the use
of the
∧
and
∨
keys, refer to the diagrams on
the following pages.
•
TRIP Mode
In TRIP mode, the PRG/RESET key resets the
inverter. Refer to Chapter 8.
FUNC/DATA key
•
RUN mode or STOP mode
The Function/Data key calls up the Data of the
Function selected in PROGRAM mode.
For the explanation of procedures and the use
of the
∧
and
∨
keys, refer to the diagrams on
the following pages.
•
STOP Mode
The FUNC/DATA key permits the selection
of one of the 5 different inverter output para-
meters for display on the 7-segment LEDs.
Refer to Changing the Inverter Output
Display, page 16.
NOTES
1 All Functions can be read in both RUN
and STOP modes, and all Functions can
be adjusted in STOP mode. In RUN
mode, some Functions are ‘read only’.
Refer to Chapter 7.
2 If Function Data is protected, adjustment
is not possible. Refer to Function 00
page 26, and Function 57 page 37.
18
Содержание Jaguar VXS
Страница 1: ......
