IMET GBS 218, Инструкция по эксплуатации, Страница: 8 / 35

TRADUCTION OF THE ORIGINAL INSTRUCTIONS FOR USE
GBS 218 / AutoCut ED.2010eng rev.00
8/35
6
– TECHNICAL CHARACTERISTICS
–
Band sawing machine in compliance with E.C. - CSA - UL Safety Norms and with the Norms of
Electromagnetic Compatibility (EMC). Suitable for cutting metal profiles and solids. The cast iron
welded saw frame swivels from 0 to 60 deg. left. Band tension 1500 Kg/cm². , 290-mm diameter
band wheels. LONG.LIFE Gear reducer, . Hard metal pads inside the band guides and bearings.
Cast iron work support
with groove already predisposed ono 15/30/45/60 °angles .
. .
STANDARD VERSION COMPLETE WITH:
electrical components complying with E.C. Norm EN60204-1, EN55011, EN50082-2, low voltage
(24V) with start button inside the handle of the control lever, micro switches on the band protection
guard and on the band tensioner; front fixed screw vice with quick locking and fast positioning, jaws
of 125 mm height, quick and positive location at 0, 45 and 60 deg. left; base with 15 liter coolant tank
and pump, composable floor stand with front door, blade brush, saw frame return spring, bi-metal
band, and manual of instructions.
Available versions :
manual: with 3-phase 2-speed motor .
Autocut : same features
of the manual version plus the “Autocut System ”
, which takes advantage of
the sawframe weight to make autonomous cuts with adjustable downfeed speed. Manual lifting of the
sawframe after the cut.
The technical specifications that you will find in the following tables serve to have a general
evaluation of the machine and its performances.

If not differently indicated, all data reported in this manual refer to the standard version,
suitable for working at 400 V / 50 Hz if THREEPHASE.
= cutting capacity( max. allovable dimensions)
= blade dimensions = weight =vice opening
=motor choice and blade speeds (at 50 Hz);
mm. Kw Mt/min mm. Kg. mm. mm. mm.
2455x27x0,9
1,2
3~ 35-70 250 240
220
210 250x110
150
115 150x110
0.75
1 3 ~
15 / 60
(ESC) 240 195
90
90 90x100
If the minimal lubrication is installed, the maximum capacities are reduced by about 10 mm
Dimensions
(mm)
B
width
L
lenght
H
height
h
worktable height
In use 680 1400 1800 Min.910
Packing 750 1400 930 WEIGHT=262 Kg
MAX.