IMET GBS 218, Инструкция по эксплуатации, Страница: 23 / 35

TRADUCTION OF THE ORIGINAL INSTRUCTIONS FOR USE
GBS 218 / AutoCut ED.2010eng rev.00
23/35
19 - MACHINE RUNNING-IN
The recurrent maintenance that this machine needs is necessary to guarantee the continuous right working in the time
and to keep the starting features of the machine.
At the beginning of the use you must do some extra operations to allow the all parts of the machine to settle down in the
final using conditions.
Please check frequently the working of the machine and do not force it to make too much cuts. For a time of 80/100
working hours control the outside temperature of the drive box and of the motor.
The heating of the mechanical is due to the usual working and anyhow does not exceed the foreseen thermic
limits (EN 563) .
20 - DRAINING OF USED / PRODUCED SUBSTANCES
Please remember to follow the current Law Norms concerning the draining of:
- materials used by the machine (for example hydraulic circuit oil, reduction gear oil, oil for installations of
lubrication and so on);
- working scrap materials or materials not usable anymore (for example ferrous and not ferrous chips, tools like:
saw bands and blades and so on);
- substances used for cleaning and maintenance;
- materials used in some periods of machine life only (for example for packing, transit and so on).
- Do not throw the packing away as it might be used in case you should transit the machine or return it to the distributor or
to the service staff - when the machine is still under guarantee.
21 - DEFECTS IDENTIFICATION
The solution of most inconvenients that could
happen during the working can be found by
consulting this paragraph.
The first part concerns the machine working and
includes a list of the possible defects with
respective controls that must be made; the second