IMET GBS 218, Инструкция по эксплуатации, Страница: 2 / 35

TRADUCTION OF THE ORIGINAL INSTRUCTIONS FOR USE
GBS 218 / AutoCut ED.2010eng rev.00
2/35
1-
We recommend to read carefully the information here included in order to install, use and maintain
correctly and safely this machine.
Please refer always to this instruction manual in case of assistance service need and keep it carefully
for all the machine life.PLS CALL +390354387918 or +390354387928.
A consequence of the continuous improvement of the product is that some images/descriptions here
included could not correspond to the improved features of the machines.
Your kind collaboration would help us in intevening asap.
In the enclosed Compliance Declaration you will find the Safety and Reference Norms applied during
the planning and construction of this machine.
The choice and the use of the parts have been made by considering the conditions of use and the
long machine life.
The identification plate, with the serial number, is fixed on the front right angle ;
1.1 - ATTACHED DOCUMENT FOR E.M.C. ( INDUSTRIAL ENVIRONMENT)
The user is responsible for the installation and use of this machine in compliance with the
manufacturer's instructions shown in this manual. This equipment meets the protection requirements
in accordance with the Directives 2006/42/EEC, 2004/108/CE for Electromagnetic Compatibility
(EMC). In particular, it follows the technical guidelines of the Directives EN55011, EN50082-2 and it
has been made for industrial and not for household use.
In the event of electromagnetic interferences the user is responsible for solving the problem with the
help of the technical assistance by the manufacturer. Before installing the machine the user must
take into account possible electromagnetic problems of the working area. In particular, we suggest to
install the machine away from:
-signalling, control and telephone cables;
-radio-television transmitters and receivers;
-computers or controlling and measuring instrument;
-safety and protection devices.
The electric supply cable must be kept as short as possible, without any twists.
Covers, doors and the frame must be suitably closed when the saw is operating.
Under no circumstances the machine must be modified except for adjustments and changes
specifically approved by the manufacturer. Follow the maintenance schedule.