Imerge MS1-3D, Руководство пользователя

Страница: 20 / 76

16
USER GUIDE
Page
MS-3D MediaServer / MediaPlayer
© Copyright Prism Media Products Ltd 2012
FOR INDOOR USE ONLY. THIS PRODUCT MUST BE EARTHED
ESATA
IN
CONTROLLER
Mains Input:
100V - 240V
~ 50Hz/60Hz 120W
IR
DIGITAL
OUT
OPTICAL
2
COAX
2
USB
LAN
DVI HDMI
1
XIVA AND IMERGE
ARE TRADEMARKs
OF PRISM MEDIA
PRODUCTS LIMITED
N1832
Video Out
Line
Level
2 3 4 5
L
R
THE Ms1-3D MEDIAsERVER / PLAYER
FRONT VIEW
REAR VIEW
sTANDBY BUTTON
Press the Standby button to turn the MediaServer on;
press it again to turn the it off.
EJECT BUTTON
Pressing the EJECT button ejects the disc.
DIsC PLAYER
CDs and DVDs should be inserted with the label side
facing up.
IR RECEIVE 1
The front panel Infrared Receive window allows
remote control information to be transmitted to the
MediaServer
VIDEO HDMI
Use the HDMI connector to connect your MediaServer to
a digital flat-panel television or projector. HDMI Output
is usually connected to the main television in your home
used for viewing movies.
To take advantage of the Surround Sound Audio Format,
it is necessary to connect the audio output to a device
capable of decoding the surround sound signal.
If your digital TV can decode the signal, simply •
connect it to the HDMI socket on the back of the
MediaServer.
If your digital TV does not decode the signal, noise •
will be emitted by the TV’s speakers. In this case
you should mute the TV’s volume and connect an
amplifier with this capability to the digital output
(17) of the MediaServer.
VIDEO DVI
This connector should not be used.
EsATA
Use one of these sockets to connect a XiVASafe eSATA
external storage unit.
MAINs
Connect the supplied mains lead to this connector to
provide power to the unit.
CONTROLLER
This socket is used to connect an RS232 controller
LAN (ETHERNET)
The Ethernet port is used to connect the MediaServer to
a network or high speed Internet connection.
UsB
Allows the MediaServer to communicate with supported
USB devices.
DIGITAL OUT (OUTPUT 2)
Optical and coaxial digital outputs can be used to
transmit digital bitstreams to an A/V amplifier or D/A
converter, without first being converted to analogue
These outputs may not be used for making a digital copy
of your media.
IR RECEIVE 2
The IR Receive connection allows remote control