23
USER GUIDE
Page
MS1-3D MediaServer / MediaPlayer
© Copyright Prism Media Products Ltd 2012
GRAPHICAL UsER INTERFACEs
The equipment is provided with an advanced graphical user interface, which can be displayed on televisions throughout your
home and controlled using the supplied remote control or a correctly-programmed third-party device such as a Savant™ or
an iPhone™ or iTouch™ with Imerge Controller installed. In addition to the television user interface, the equipment can also
display especially constructed user interfaces on touch panel displays and computer screens. The user interfaces are used to
control the recording, cataloguing and playback of your music and movies.
The Video screens
Your MediaServer has an HDMI video output and four audio outputs, each of which can be independently accessed and
controlled. These are enumerated Output 1 (HDMI) - 5 accordingly. The default movie Audio Output will be HDMI, as
this provides the best sonic performance (HD audio, Dolby Digital TrueHD, etc.) Should an SPDIF output be required the
following changes need to be made:
- Change the default movie audio output to manual -> select SPDIF (BitStream) or stereo,
- on the TV UI, naviagate to the Now Playing screen and select Output 2. Note that if additional clients are connected, this
output number on the first such client will be 7, for example.
The MS1-3D automatically selects the best display and audio resolution supported by the display and amplifier. If the
amplifier supports HD Audio, the MS1-3D will automatically select HD audio for BD playback. If the amplifier does not
support HD Audio, the MS1-3D will automatically re-configure to support other formats such as DTS or Dolby Digital.
The MS1-3D does the same with the display configuration. The system will automatically detect the best resolution and
whether or not the TV/Amplifier supports 3D. If it does not, the system will revert to anaglyphic (red/cyan) display.
