imagistics VarioPrint 5000, Руководство по эксплуатации

Страница: 95 / 146

3.48
Basic operation
10
Using the cursor key, select the mode you want. Then press
ENTER
.
If you want to make another setting, repeat step 9 and 10.
Note: Choose “-----” if you do not want to specify for this programmable one-
touch key.
11
Select “Exit” and press
ENTER
.
12
Press
STOP
to return your machine to standby mode.
Programming a Program key for F-Code polling
For this operation to work, two things must be true:
• The document which you’re polling must exist in the remote fax’s F-Code box (
ITU
-
T
standard sub-addressing/password box).
• You must know the remote fax’s
ITU
-
T
sub-address and password (if any) for each
box you want to poll.
To program an F-Code polling operating into a programmable one-touch key:
1
Follow steps 1–6 on pages 3.44–3.45.
2
Select “F-Code Polling” and press
ENTER
. The
LCD
shows:
3
Use the numeric keypad to enter the
ITU
-
T
sub-address for the box to which
you want to send the document.
4
Press
ENTER
. The
LCD
shows:
Note: If there isn’t a password for this box, press
ENTER
, then skip to step 6.
5
Use the numeric keypad to enter the appropriate
ITU
-
T
password for the box.
Then press
ENTER
.
6
If you want the polling to begin immediately every time you press the key,
proceed to step 7.
If you want to delay the polling, follow steps 7–9 on page 3.45.
7
Select “Exit” and press
ENTER
.
The
LCD
asks if you want to make option settings which includes; resolution,
contrast, memory transmission, report, cover page and Fax & Copy. If you
want to make any of these settings, select ON using the cursor key.
8
Press
ENTER
.
If you select ON, proceed to step 9.
If you select OFF, skip to step 12.
9
Using the cursor key, select the setting you want to specify for this program-
mable one-touch number. Then press
ENTER
.
10
Using the cursor key, select the mode you want. Then press
ENTER
.
If you want to make another setting, repeat step 9 and 10.
Note: Choose “-----” if you do not want to specify for this programmable one-
touch key.
11
Select “Exit” and press
ENTER
.
12
Press
STOP
to return your machine to standby mode.
F-Code Polling F-Code Polling
Enter Password
Enter Password
_
F-Code Polling F-Code Polling
Enter Sub-Address
Enter Sub-Address
_