cDVR User Guide, Release 2.0
37
RM Redundancy Setup - Redundancy Configuration Instructions
6.
Click the wrench [
] icon to bring up the
Modify
window.
The
Group Type
and
Product Type
menus are preselected for
1+1
and
RAPS
respectively as
shown below. :
7.
In the
Virtual IP
field, enter the virtual IP address that will be assigned to both the Primary and
Standby RMs.
8.
Click
Submit
to save and add the redundancy group.
9.
Confirm the
Connection Status
icon in the top right corner of the GUI changes from red to green
(response time should be less than a minute).
Note:
Once you have configured a redundancy group from the physical IP address of the master RM, all
further configuration, including the section below, should be performed via the GUI of the VIP
which you set in
above.
Add
Standby
Host
from
Primary
RM
10.
Log in to the VIP address of the redundancy group.
11.
From the
System
tab of the VIP RM, click the triangle [
] symbol next to the
Redundancy
container to expand the menu, then click on
Hosts
.
12.
From the
Redundancy Host
menu, click the plus (
) icon to add a host entry (the Primary host
entry will already be present).
The ADD menu will open.
