ILX Lightwave LDC-3700C Series, Руководство пользователя, Страница: 81 / 176

C O M M A N D R E F E R E N C E
Remote Command Reference Summary
04_09 LDC-3700C Series
65
C H A P T E R
4

LAS:DIS:SET
NONE Shows the LASER display set point corresponding to mode.
LAS:DIS:SET?
NONE Returns status of LASER set point display, on/off.
LAS:ENAB:COND
1 Sets the enable register for LASER conditions.
LAS:ENAB:COND?
NONE Returns the value of the LAS conditions enable register.
LAS:ENAB:EVE
1 Sets the enable register for LAS events.
LAS:ENAB:EVE?
NONE Returns the value of the LAS event enable register.
LAS:ENAB:OUTOFF
1 Sets the enable register for LAS conditions which turn the LAS
output off.
LAS:ENAB:OUTOFF?
NONE Returns the value of the LAS outoff enable register.
LAS:EVENT?
NONE Returns the value of the LAS event register.
LAS:LDI
1 Used to set the LASER constant current source set point value.
LAS:LDI?
NONE Used to return the constant current source measured value
LAS:INC
0, 1 or 2 Used to increment the LASER set point value by one or more
steps.
LAS:LDV
1 Used to set the laser voltage value for calibration.
LAS:LDV?
NONE Used to return the measured laser voltage value
LAS:LIM:I1
1 Used to set the LASER current source limit (low range for
3714C/3744C).
LAS:LIM:I1?
NONE Used to return the LASER current source limit (low range for
3714C/3744C).
LAS:LIM:I2
1 Used to set the LASER current source limit (low range for
3724C).
LAS:LIM:I2?
NONE Used to return the LASER current source limit (low range for
3724C).
LAS:LIM:I3
1 Used to set the LASER current source limit (high range for
3744C).
LAS:LIM:I3?
NONE Used to return the LASER current source limit (high range for
3744C).
LAS:LIM:I4
1 Used to set the LASER current source limit (high range for
3744C).
LAS:LIM:I4?
NONE Used to return the LASER current source limit (high range for
3744C).
LAS:LIM:I5
1 Used to set the LASER current source limit (high range for
3714C/3724C).
LAS:LIM:I5?
NONE Used to return the LASER current source limit (high range for
3714C/3724C).
LAS:LIM:MDP
1 Used to set the constant optical power (from monitor PD) limit
value.
LAS:LIM:MDP?
NONE Used to return the optical power (from monitor PD) limit value.
LAS:LIM:V
1 Used to set the LASER compliance voltage limit value.
LAS:LIM:V?
NONE Used to return the LASER compliance voltage limit value.
LAS:MDI
1 Used to set the constant optical power set point, if PD
responsivity is 0.
LAS:MDI?
NONE Used to return the monitor PD current measured value.
LAS:MDP
1 Used to set the constant optical power set point.
Table 4.1 Remote Command Summary Reference List
Name Parameters Function