ILX Lightwave LDC-3700C Series, Руководство пользователя, Страница: 122 / 176

C O M M A N D R E F E R E N C E
Command Reference
106
LDC-3700C Series
C H A P T E R
4

Action Recalls a stored setup configuration from memory.
Value range 0 through 10
Notes Setup 0 has a factory-set default configuration.
If you use GPIB or USB to recall setup
0
(
*RCL 0
), the LOCAL / REMOTE mode is set to
REMOTE. If you recall setup "0" by the front panel, the LOCAL / REMOTE mode is set to
LOCAL.
Same function as RECALL on the front panel.
Use
*SAV
to store various setup configurations for convenient recall.
The current setup is automatically stored and recalled at next power-ON, unless you use
*PSC
to tell the instrument not to do so.
Examples *RCL 0 Recall the factory default setup.
Action Performs a device reset and the following:
Sets OCIS state
Sets OQIS state
Notes OCIS = Operation-complete Command Idle State. This is the same state as after *OPC :
no further operations to complete.
OQIS = Operation-complete Query Idle State. This is the same state as after *OPC? : no
further operations to complete.
These idle states allow the 8033 to complete its reset process (no operations pending)
before con-tinuing with other operations.
Example *RST
Action Saves the current setup configuration in memory.
Value range 1 through 10
Notes Configuration
0
is reserved for a factory-set default configuration. See
*RCL
.
It is normally not necessary to save the current setup for next power-ON. The current
setup is automatically stored for recall at next power-ON unless you use
*PSC
not to do
so.
Example
*SAV 2—
Save the current setup configuration as #2.
*RCL <nrf value>
Recall
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
*RST
Reset
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
*SAV <nrf value>
Save
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL