Illinois Tool Works 5750-440, Руководство по эксплуатации

Страница: 19 / 85

OPERATIONS MANUAL – 5750440 – REVISION D
Changing Ink Colors
B7
Changing colors of ink requires complete flushing of the
printhead.
1
1
Disconnect the original can of ink.
2
2
Attach the effluent bottle kit to the male OUT fitting on
the back of the printhead
(A) . Make sure that the
valve on the effluent line is closed (B) .
3
3
Insert a can of conditioner in the ink receptacle.
4
4
Open the valve (B) in the effluent line. Allow the liquid
to empty into the effluent bottle (C) until it runs clear.
5
5
Close the valve on the effluent line.
6
6
Remove the can of conditioner and insert the can of
ink with the new color.
7
7
Open the valve on the effluent line and allow the fluid
to run out until the color is undiluted. Turn off the
valve.
8
8
Disconnect the effluent line from the back of the
printhead. Clean up any drips with a lint-free wipe.
9
9
Hold the wipe in front of the printhead and press
PURGE repeatedly until the printhead ejects
undiluted ink.
B
c
A