Illinois Tool Works 5750-440, Руководство по эксплуатации

Страница: 25 / 85

OPERATIONS MANUAL – 5750440 – REVISION D
Changing the Printed Dot Size
C5
The system allows you to change the diameter of all the dots that form printed characters in a range
from 0.05 inch (1.27mm) to 0.10 inch (2.54mm). The default dot size is 4.
1
1
Press SET-UP.
2
2
Press DOT SIZE. The LCD will prompt
for a dot diameter:
3
3
Scroll to a new dot diameter
and press ENTER.
Try sample prints with the new dot
diameter to see if you have
improved the printing. If not, change
the dot size and run more print
samples.
The scanned samples following show the differences in printed characters when the dot size is 3, then 4
and finally 7.
Dot diameter (1-9):
4
Dot Size 3 Dot Size 4 Dot Size 7