OPERATIONS MANUAL – 5750440 – REVISION D
Black Adapter
for Porous
Black Receiver
for Porous
Red Adapter
for Non-Porous
Red Receiver
for Non-Porous
Maintenance
B
Loading Ink
B1
Do not stop printing when you run low on ink. The system has enough ink in its delivery system to
continue printing until you install a fresh can.
1
1
Unscrew the old can and set aside.
2
2
Remove the cap from the new can, invert and screw into
the ink receptacle. Make sure that the ink can adapter and
the receiver on the ink delivery system are the same color.
Black adapter and black receiver indicate water-based
porous.
Red adapter and red receiver indicate alcohol-based
non-porous.
3
3
Dispose of the old can in accordance with local, state and
federal regulations.
CAUTION
1. Use only water-based
porous inks, identified
with
black
fittings, for
porous printers with
black
receivers.
2.
DO NOT SHAKE THE
INK CAN
.
NOTE:
When the ink can empties, ink
pressure drops below normal operating
pressure. This causes ink to collect on the
face plate. The face plate should be
cleaned every time the ink can is replaced.
CAUTION
1. Use only alcohol-based
non-porous inks, identified
with
red
fittings, for non-
porous printers with
red
receivers.
2.
DO NOT SHAKE THE INK
CAN
.
Содержание 5750-440
