-28-
6.4.3 Environment
•
Darkroom where the illuminance on the screen is 5 lx or below with no image
projected
•
Projection screen size: 40 inches diagonal
6.4.4 Verification of Basic Operation
Conditions
(1) Connect the AC power cord to the LPX100 projector and turn on the power.
•
The unit starts up in Standby mode.
•
The input voltage is 100VAC 50/60Hz.
(2) In the Standby mode, press the <ON/STANDBY> key to turn on the Lamp.
To enter the Test mode, use the following key combination continuously.
<ON/STANDBY> and <MENU/ENTER>
<KEYSTONE
> and <AUTO SYNC>
<SOURCE> and <KEYSTONE >
In the Test mode, the LAMP LED is lit orange and the TEMP LED is lit red. The
menu is displayed on the projected image.
Requirements:
The states of the functions are as follows.
(1) In the Standby mode:
•
POWER LED:
On Red
•
LAMP LED:
OFF
•
TEMP LED:
OFF
•
Fans (at 4 places):
Stopped
(Side: Intake, Lamp: Intake, Power supply: Exhaust, PBS)
(2) When the lamp is on:
•
POWER LED:
ON Green
•
LAMP LED:
Blinking Green ON Green
•
TEMP LED:
OFF
•
Fans (at 4 places):
Rotating
Measurement:
Key Panel
Projected image
Fan
